Why Limit Switches Trip—and Why It Matters
The high-limit switch is your furnace's primary thermal safety control. If internal cabinet temperatures climb too high—because of a clogged filter, closed registers, or a failing blower motor—the limit switch cuts gas burner operation immediately.
Repeatedly resetting a tripping furnace without fixing the airflow restriction stresses the metal heat exchanger, leading to premature metal fatigue and cracks.
Heat Exchanger Safety Inspections
In older homes throughout Old Orland and Tinley Park & Orland Hills, furnaces over 15 years old should undergo thorough heat exchanger checks whenever short cycling or flame rollout occurs:
- Visual & Borescope Camera Inspection: Checking burner tubes and dimples for hairline stress cracks or rust perforations.
- Combustion & CO Testing: Measuring flue-gas carbon monoxide levels and oxygen balance before and after the blower kicks on.
- Flame Rollout & Draft Verification: Confirming combustion gases exit cleanly through the flue rather than spilling into the cabinet.
If a heat exchanger is cracked, it cannot be safely patched. Read our Illinois repair vs. replace guide (including Village of Orland Park permit rules) or return to our Orland Park furnace repair homepage.
Frequently Asked Questions
Warning signs include soot around the burners, a sharp metallic or chemical odor, flickering yellow flames when the blower starts, or a triggered carbon monoxide detector.
A faulty high-limit switch itself is a relatively modest repair, provided the technician also resolves the underlying airflow restriction that caused it to overheat.